FAQs

ClearShield ‘Non-Stick’ Glass is a unique and higher quality of glass which can be kept looking and performing like new for life. ClearShield Glass keeps its promise of clarity, visibility and easy-clean.

No. ClearShield only works on vitreous surfaces such as glass, ceramics and porcelain. It washes off other surfaces.

Yes. Again, just as ‘non-stick’ cookware needs some cleaning, so does ClearShield Glass. On average, cleaning is required less than half as often as with ordinary glass.

No, except to maintain the original performance by keeping the glass cleaner and brighter.

We have developed special after-care products to maintain the performance and appearance of ClearShield Glass for life.
ClearShield Glass works like ‘non-stick’ cookware. It: is much easier to clean and keep clean – eliminating the need for harsh and abrasive cleaning products or methods resists staining and discolouration – keeping its ‘as new’ appearance and performance much longer looks cleaner and brighter for longer between cleanings – improving general appearance, performance and customer satisfaction
By a special process (the ClearShield System) which converts the surface of ordinary glass into a ‘non-stick’, easy-clean surface that is chemically inert to most substances.
When a simple and economical after-care programme is followed, ClearShield Glass looks and performs like new for years, depending on environmental conditions.
This depends upon where and how ClearShield Glass is produced. If factory applied, the cost depends mainly upon type of glass and method of production. If onsite, the cost of converting ordinary glass into ClearShield Glass depends mainly upon condition of the glass, e.g. the degree of staining/discolouration and accessibility.Please refer to our services page to find out estimated prices.
Our products are recommended because they are specially formulated to maintain the appearance and performance of ClearShield Glass. Other products may be used provided they are not abrasive and do not leave a residue or film, but we should be consulted if the performance and appearance of ClearShield Glass are to be optimised.
For glass already stained/discoloured, the ClearShield System restores the surface to its original and ‘as-new’ appearance. Then, after the glass is converted into ClearShield ‘Non-Stick’ Glass, a simple and economical after-care programme is recommended. The after-care programme keeps ClearShield ‘Non-Stick’ Glass looking and performing like new for life – keeping its promise of visibility, clarity and cleanliness.
The after-care programme consists of: after-care products specially formulated to maintain the appearance and performance of ClearShield Glass a “booster” to restore the appearance and performance whenever reduced by atmospheric abrasion or chemical attack, such as hard water deposits or concrete run-off.
Similar to ‘non-stick’ cookware, abrasive cleaners and harsh chemicals can attack the surface of ClearShield Glass. However, such products are not necessary due to the ‘easy-clean’ properties of ClearShield Glass.
Either to new glass in the factory of a glass processor/fabricator or to existing glass in a building, marine vessel or transportation vehicle.

Are Ye Canny?

At Canny we strongly believe in delivering only the best quality of services and products, which provide long-term value for money to our customers & provide consistency in everything that we do.

Shop Now!

Surface Protection And Restoration Services

We offer a wide range of surface protection and restoration services for glass, ceramics, porcelain and stainless steel surfaces, for both residential and commercial customers.

Time to Get Canny? Enquire Now!